Description
Properties
Main material resin + photoinitiator Viscosity(25°C) 552.0mpa.s
Capacity 500ml/1L Liquid density 1.100g/cm3
Solidify wavelength 405mm Solid density 1.184g/cm3
Shelf life 12 months Tensile strength 23.4Mpa
Hardness(D) 79.0 Elongation 14.2%
Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15s
Precautions:
Shake well before each use
Way to Rinse: Clean with alcohol. DO NOT immerse model into alcohol for long time.
Wear gloves and masks during operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
Use and preserve resins in room temperature, and in dark and ventilated conditions
Keep resin away from kids and from direct sunlight exposure
DO NOT dump resin. Please cure it and treat it as general plastic garbage.
After receiving your Phrozen resins, it is strongly recommend to consume it as soon as possible. Resins have a shelf life of one year.
Compatibility
Compatible with all LCD 3D Printers with 355nm-410nm light source similar to Sonic Mini 4k, Sonic Mighty 4k, Elegoo Mars 2 pro, Anycubic Photon Mono, etc