SKU: SM-A6202-1.
Category: .

Anycubic Grey Colored Based UV Resin Standard


Quick Curing: ANYCUBIC photopolymer resin was specially developed to reduce the forming time with its extraordinary fluidity, and 3d model shows good stability in moist and corrosive environment after cured.
Rigidity & Toughness: It has a good combination of hardness and toughness, which brings easy removal of the model and delivers accurate printing details.
Applications: Wide range of applications from micro board games models, science exhibition projects, Sculptures and toys.

Weight 1.2 kg

0.5 ltr




Main material resin + photoinitiator Viscosity(25°C) 552.0mpa.s
Capacity 500ml/1L Liquid density 1.100g/cm3
Solidify wavelength 405mm Solid density 1.184g/cm3
Shelf life 12 months Tensile strength 23.4Mpa
Hardness(D) 79.0 Elongation 14.2%
Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15s


Shake well before each use
Way to Rinse: Clean with alcohol. DO NOT immerse model into alcohol for long time.
Wear gloves and masks during operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
Use and preserve resins in room temperature, and in dark and ventilated conditions
Keep resin away from kids and from direct sunlight exposure
DO NOT dump resin. Please cure it and treat it as general plastic garbage.
After receiving your Phrozen resins, it is strongly recommend to consume it as soon as possible. Resins have a shelf life of one year.


Compatible with all LCD 3D Printers with 355nm-410nm light source similar to Sonic Mini 4k, Sonic Mighty 4k, Elegoo Mars 2 pro, Anycubic Photon Mono, etc