Description
Properties
Hardness 84D Bending Stength 59-70MPa
Viscosity 150-300MPa*s(25°C) Extension Strength 36-52MPa
Shrinkage 3.72-4.24% Vitrification Temp 100°C
Shelf Time 1 Year Thermal Deformation 80°C
Solid Density 1.05-1.25g/cm3 `Elangation at Break 11%-20%
Wave Length 355mm-410mm Thermal Expansion 95*E-6
Bottom layers: 5-10; Bottom layer exposure: 60-8s; Normal exposure; 8-10s
(The optimal exposure time is based on the actual printing results)
Precautions:
Shake well before each use
Way to Rinse: Clean with alcohol. DO NOT immerse model into alcohol for long time.
Wear gloves and masks during operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
Use and preserve resins in room temperature, and in dark and ventilated conditions
Keep resin away from kids and from direct sunlight exposure
DO NOT dump resin. Please cure it and treat it as general plastic garbage.
After receiving your Phrozen resins, it is strongly recommend to consume it as soon as possible. Resins have a shelf life of one year.
Compatibility
Compatible with all LCD 3D Printers with 355nm-410nm light source similar to Sonic Mini 4k, Sonic Mighty 4k, Elegoo Mars 2 pro, Anycubic Photon Mono, etc
